Pool Floats Storage – 6 Tips
When pool time is over, its time to look at storage for pool floats. Check out 6 tips for pool floats storage to keep your pool floats ready for next time you use the pool.
Contents
Pool Floats Storage
Pool floats came into existence in 1907 as a safety device. However, as days passed, manufacturers started introducing aesthetically shaped models, from butterflies, dinosaurs, crocodiles, swans, and pizza-shaped to inbuilt drink holders available in the market.
After using the float at the pool, don’t leave them overnight in the pool because the chemicals in the water react with the float, causing the breakdown of the plastic or vinyl material. So thoroughly rinse the inflatable with the water after its daily use.
Nothing is better than having a great time floating on the water at the pool. But if you find your favorite float with a hole in the pool, it will be disappointing. So, before that, just plan to store the pool accessories in pristine condition.
If you don’t know how to store them, read the tips and tricks for pool floats storage in the coming section.
Tips & Tricks For Storing Your Favorite Pool Floats
To maintain a long-term relationship with your newly purchased pool float, follow the below tips and tricks for pool float storage.
#1 Wash And Dry Your Pool Floats Thoroughly Before Storage
Clean your floating pool toys and wipe them or let the moisture on them evaporate well before storage. Damp and muddy pool floats will be a perfect environment for accumulating pests and mildew. You should follow similar care for pool toys and pool noodles.
● Clean the float with a cloth to remove the dirt particles
● Wash it with clean water
● Now clean with a bucket full of warm water using a mild soap
● Now wipe the float with a cloth dipped in soap water for removal of any crannies
● If the float turns to mold, then add a tablespoon of bleach to a bucket of water and rinse with the water
● Wipe the float with a cloth and allow it to air-dry
#2 Never Expose Pool Floats To Direct Sunlight For Extended Periods of Time
Don’t overexpose the floats in the sun on your patio or pool for a long time. Overexposure to heat leads to the expansion of air inside the float. Do not leave them on the deck outdoors in scorching heat; keep them in the shade if required.
If you leave the float in the sun rays for a long time, then release a small quantity of air before using it. And you notice the reverse effect if the float is exposed to cool air on summer nights. In this case, add a small quantity of air to the inflatable float
#3. Deflate The Air From Your Pool Floats
Inflatable pool floats occupies a lot of space and organizing them is tedious. But we can condense the float easily using a deflator pump. Gently fold the float, and select an air-tight container to store it in a dry place easily.
#4 Roll Your Deflated Pool Floats
Lay the deflated pool float on a flat surface, thoroughly check the accumulation of built-up dirt and debris and start rolling the floats. Don’t roll the flats very tightly, which may damage the floating material.
#5 Pack Pool Floats In An Airtight Container
To protect them from damage, pool floats should be stored in airtight containers. Airtight containers will protect against pests, mold, and mildew.
If you are uncomfortable with storing pool floats in big containers, you can also use vacuum-sealed bags that serve the same purpose and occupy less space. Before placing it in an airtight container, coat the entire surface of the float with corn starch or talcum powder. It helps to avoid the plastic or vinyl material sticking to itself in the pool floats storage container.
#6 Carefully Place Pool Floats In The Safe Place To Avoid Damage
Once the cleaning and storing pool floats in an airtight container is done, place pool floats in a safe space to avoid damage from elements such as wind, rain, ice, and snow.
FAQs
How much time does it take to inflate or deflate Pool Floats?
An external source like an air pump is required to inflate the floating material. With its help, inflating the large pool accessories can be done in less than 5 minutes. An electric pump with a deflation connector is required to deflate the float, which will suck the excess air in around 5 minutes.
Why does my pool float inflate or deflate when exposed to sunlight?
We all are aware of the behavior of the air. It expands in hot temperatures and contracts in cold temperatures. During the daytime, you can notice that the float is fully inflatable, but when you leave the float in the pool overnight, you will notice the pressure loss. A pump is required to fill the required pressure at this point.
Where to store pool floats?
Pool floats should be stored in airtight container if not using for extended period of time. Make sure pool floats are dry before storing.
How to clean pool floats?
1. Clean the float with a cloth to remove the dirt particles
2. Now clean with a bucket full of warm water using a mild soap
3. Now wipe the float with a cloth dipped in soap water for removal of any crannies
4. If the float has mold on it, then add a tablespoon of bleach to a bucket of water and rinse with the water
5. Wipe the float with a cloth and allow it to air-dry
Conclusion
Having an appropriate pool float is important to enjoy the time at the pool. You can find the top pool floats in multiple shapes and sizes on Amazon.
To extend the life of your pool floats follow our six tips above for pool floats storage. This will help keep your favorite flamingo float ready for next season.
Herbert is a swimming enthusiast. Started career working as a lifeguard, and in pool maintenance. He loves to share his experience and recommendation on this blog.